Difference between revisions of "Email loses carriage returns"
From Swivel Knowledgebase
(Created page with 'Category:symptom Image:logo.gif ==Overview== When the PINsafe appliance or server is rebooted, email alert messages are sent without carriage returns. ==Prerequisite…') |
m (1 revision imported) |
(No difference)
| |
Latest revision as of 12:52, 11 May 2017
Contents
Overview
When the PINsafe appliance or server is rebooted, email alert messages are sent without carriage returns.
Prerequisites
PINsafe 3.x
Symptoms
Email messages appear with the incorrect carriage returns used for the email formatting
Solution
Selecting the correct transport type and then clicking Apply will ensure that the settings are saved, but the problem will occur when there is another reboot.
Instead of putting line breaks in the message, put the following: "%CR%LF", which will insert line breaks in the outgoing message. Do not put line breaks as well as the %CR%LF, as that will result in double line-breaks (until PINsafe is restarted).
