Difference between revisions of "Sentry SSO with Azure"

From Swivel Knowledgebase
Jump to: navigation, search
(Configuring Sentry)
(Introduction)
Line 4: Line 4:
  
 
This article describes how to configure Azure Active Directory to allow authentication through Swivel Secure Sentry Single Sign-On. This allows access to Office 365 and other applications that require Azure, without the need for Active Directory Federation Services (ADFS). If your Azure domain is backed by ADFS, then see the article on [[Sentry_SSO_with_ADFS]].
 
This article describes how to configure Azure Active Directory to allow authentication through Swivel Secure Sentry Single Sign-On. This allows access to Office 365 and other applications that require Azure, without the need for Active Directory Federation Services (ADFS). If your Azure domain is backed by ADFS, then see the article on [[Sentry_SSO_with_ADFS]].
 +
 +
==Configuring Sentry Repository==
 +
 +
It is assumed that you already have a suitable Azure domain configured for use with Sentry authentication. In order to use this domain for Sentry SSO, you need to import the users into the Sentry database. Instructions for doing that will be provided later.
 +
 
==Configuring Sentry==
 
==Configuring Sentry==
  

Revision as of 15:37, 20 February 2018

Configuring Sentry SSO with Azure Active Directory

Introduction

This article is under construction. Please do not use it until this notification is removed.

This article describes how to configure Azure Active Directory to allow authentication through Swivel Secure Sentry Single Sign-On. This allows access to Office 365 and other applications that require Azure, without the need for Active Directory Federation Services (ADFS). If your Azure domain is backed by ADFS, then see the article on Sentry_SSO_with_ADFS.

Configuring Sentry Repository

It is assumed that you already have a suitable Azure domain configured for use with Sentry authentication. In order to use this domain for Sentry SSO, you need to import the users into the Sentry database. Instructions for doing that will be provided later.

Configuring Sentry

This article assumes that you are using Sentry version 4.0.4 or earlier. Later versions will provide a more automated process.

Log into Sentry using the Admin Login button, and locate the Applications page. Click on Add Application.

AzureSSO1.png

Select either SAML - ADFS or SAML - Office 365. The following screen shot assumes Office 365.

AzureSSO2.png

Enter the settings as shown here. The Portal URL, Endpoint URL and Entity ID must be as shown. Federated Id will depend on how your Sentry repository is configured, but will probably be either username or altusername. It should correspond to the immutable ID set in Azure AD.

Configuring Azure AD

In order to use Sentry for Azure authentication, you need to enable federated authentication on the Azure domain you are using. This applies to the entire domain: you can't enable federated authentication for some users and standard (or "managed") authentication for others. If you have multiple domains in a single Azure account, however, you can (and must) enable federated authentication for each domain separately.

The procedure below uses Microsoft PowerShell to configure Azure. It assumes you have the MSOnline powershell library installed. Note that it must be the older version referenced here. The new Azure AD module doesn't have the cmdlets referenced by the following script.

You should open a PowerShell command prompt with administrator privileges to carry this out. We are assuming that you are executing these commands interactively, but if you are sufficiently familiar with PowerShell, you can run it as a single script.

It is assumed that the domain you are going to federate has already been created and validated: managing this is outside the scope of this document.

First of all, connect to Azure:

Connect-MsolService

This command will prompt you for the username and password of your Azure account.

The following 3 lines need to be customized to match your environment:

Replace <my.domain.com> in the following line with the actual domain that you want to enable federated authentication on

$domainName="<my.domain.com>"

Replace <my.sentry.com> with the host name (and port if required) of your Swivel Secure Sentry server

$sentryUri="https://<my.sentry.com>/sentry"

Replace <my brand name> with the display name of your domain.

$brandName="<my brand name>"

The above line is optional - you could simply use

$brandName = $domainName

The following section extracts metadata from the Sentry server. It will only work if you can connect to your Sentry server without certificate errors. If you cannot do this, you will have to set $issuerUri and $cert by extracting them directly from the metadata: contact Swivel Secure support desk for help on this.

$metadataUri=$sentryUri + "/metadata/generatedMetadata.xml"
$metadata=[xml](Invoke-WebRequest -Uri $metadataUri).Content
$metadataRoot = $metadata.EntityDescriptor
$issuerUri = $metadataRoot.entityID
$cert = $metadataRoot.IDPSSODescriptor.KeyDescriptor.KeyInfo.X509Data

The next two URIs are derived from the Sentry URI

$logonUri = $sentryUri + "/saml20endpoint"
$logoffUri = $sentryUri + "/singlelogout"

Finally, now we have all the information, we can enable federated authentication

Set-MsolDomainAuthentication -DomainName $domainName -Authentication Federated -IssuerUri $issuerUri -FederationBrandName $brandName -LogOffUri $logoffUri -PassiveLogOnUri $logonUri -SigningCertificate $cert -PreferredAuthenticationProtocol "SAMLP" -MetadataExchangeUri $metadataUri

Make sure that the above is pasted all in one line.

It may take a while for the configuration changes to propagate, so don't worry if you don't get the expected results immediately.