Difference between revisions of "Restore Point"
(Created page with '{{Template:default}} {{Template:how}} ==Overview== This document covers how to create and use a restore point on a Swivel hardware or virtual appliance. A restore will set the…') |
m (1 revision imported) |
(No difference)
| |
Latest revision as of 12:52, 11 May 2017
Contents
Overview
This document covers how to create and use a restore point on a Swivel hardware or virtual appliance. A restore will set the appliance back to the time the backup was made. Restore Point allows a restore to factory defaults or when the restore point was created. For information on backup see Backup Appliance.
To perform a bare metal recovery of an appliance see Recovery Disk for Appliances How to Guide
Prerequisites
Swivel appliance with CMI
Swivel data backup
Note The data restore must match the data restore appliance type, e.g. primary master to primary master, VM to VM, hardware to hardware.
Create a customer restore Point
In the Swivel CMI menu select Backup and Restore then Advanced then Restore Points
Select Create a restore point
Restore appliance to default factory settings or customer settings
In the Swivel CMI menu select Backup and Restore then Advanced then Restore Points. Select to restore either to default factory settings or if present to cutomer settings. When eset to default factory settings it will reset back to what ever version that the appliance was shipped with, which may be a much older version of Swivel.
