Difference between revisions of "Cisco SA 520"

From Swivel Knowledgebase
Jump to: navigation, search
 
m (1 revision imported)
 
(No difference)

Latest revision as of 12:52, 11 May 2017


Introduction

This document describes steps to configure a Cisco SA 520 with PINsafe as the authentication server for authentication using SMS, Mobile Phone Client or the PINsafe Taskbar utility.

For the Cisco IPSEC client PINsafe integration see Cisco IPSEC Client Integration

Many Thanks to Brian Norrie of NCI Systems in contributing to this article.


Prerequisites

Cisco SA 520

Cisco documentation

PINsafe 3.x, 3.5 for RADIUS groups


Baseline

Cisco SA 520 firmware version 2.1.51

PINsafe 3.8

PAP Authentication was tested in this setup


Architecture

The Cisco 520 makes authentication requests against the PINsafe server by RADIUS.


Swivel Configuration

Configuring the RADIUS server

On the Swivel Administration console configure the RADIUS Server and NAS, see RADIUS Configuration


Setting up PINsafe Dual Channel Transports

See Transport Configuration


Cisco SA 520 Configuration

On the Cisco SA 520 Administration console select the Administration tab then users and domains. Click on Add, and enter the PINsafe RADIUS server authentication details for the portal.

Cisco 520 RADIUS setup.jpg


Cisco 520 RADIUS.jpg


Testing

Test authentication using a dual channel Security String or an image from the PINsafe Taskbar utility. You will need to enter your password followed immediately by the one time code into the Password field.


Cisco-SA520-Login.jpg


Additional Configuration Options

Troubleshooting

Check the PINsafe logs for RADIUS requests.


Known Issues and Limitations

Dual Channel authentication and Taskbar only


Additional Information

For assistance in the PINsafe installation and configuration please firstly contact your reseller and then email Swivel Secure support at support@swivelsecure.com