Difference between revisions of "Cisco AnyConnect"

From Swivel Knowledgebase
Jump to: navigation, search
(Introduction)
(Download the client modifications)
 
(One intermediate revision by the same user not shown)
Line 33: Line 33:
 
|-
 
|-
 
| Standard Cisco AnyConnect 4.4/5  || Yes || No || Yes || Yes || Yes  || Yes || Yes || No
 
| Standard Cisco AnyConnect 4.4/5  || Yes || No || Yes || Yes || Yes  || Yes || Yes || No
 +
|-
 +
| Standard Cisco AnyConnect 4.7  || Yes || No || Yes || Yes || Yes  || Yes || Yes || No
 
|}
 
|}
  
Line 70: Line 72:
  
 
== Download the client modifications ==
 
== Download the client modifications ==
 +
 +
You can download the 4.7 client from [https://kb.swivelsecure.com/w/images/c/c2/AnyConnectInstall.4.7.zip here].
  
 
You can download the 4.4 client from [https://kb.swivelsecure.com/w/images/1/16/AnyConnect.4.4.Install.zip here].
 
You can download the 4.4 client from [https://kb.swivelsecure.com/w/images/1/16/AnyConnect.4.4.Install.zip here].

Latest revision as of 08:54, 30 August 2019


Introduction

The Cisco AnyConnect client allows authentication using the following methods from Swivel:

This document describes a custom AnyConnect Windows client with built-in support for single channel Swivel authentication, both TURing and Pinpad. For the IPSEC client see Cisco IPSEC Client Integration.

Our custom Cisco AnyConnect clients are available for versions 2.4, 3.1, 4.4 and 4.7 of AnyConnect. Note that the 4.4 client has been successfully tested with version 4.5 as well.

Cisco AnyConnect Integration

Product Integration
Product SMS Text SMS On Demand Mobile Phone Client Token Taskbar Utility TURing Image Pinpad Index number display
Standard Cisco AnyConnect 2.4 Yes No Yes Yes Yes No No No
Swivel modified AnyConnect 2.4 Yes No Yes Yes Yes Yes No No
Standard Cisco AnyConnect 3.1 Yes No Yes Yes Yes Yes Yes No
Standard Cisco AnyConnect 4.4/5 Yes No Yes Yes Yes Yes Yes No
Standard Cisco AnyConnect 4.7 Yes No Yes Yes Yes Yes Yes No


The Cisco AnyConnect client should be downloaded from the Cisco website. The Swivel AnyConnect modifications, where available, can be downloaded below.

Cisco AnyConnect Client Integration

Configure the Cisco ASA

In order to use Swivel authentication, you need to follow the instructions in Cisco ASA Integration, creating a RADIUS server for Swivel authentication within the Cisco AnyConnect configuration. However, ignore the section on Login Page Customisation, as it is not relevant for the AnyConnect client.

The basic steps for AD Primary and Swivel RADIUS secondary are:

  • Configure the ASA for Primary authentication server access, such as AD, and test that it works.
  • From Remote Access VPN > AAA/Local Users > AAA Server Groups, create a Swivel group, and add the Swivel RADIUS servers.
  • From Remote Access VPN > Network (Client) Access > AnyConnect Connection Profiles open the required Connection Profile, and under Advanced Secondary Authentication, set the Secondary Authentication Server Group to the Swivel group.


Cisco AnyConnect Secondary Authentication Server Group.jpg


When using a Primary authentication service such as Active Directory and a secondary authentication service such as Swivel, the AnyConnect client will display an extra password field, allowing entry of username, password and One Time Code.


Install the Cisco AnyConnect Client

Download and install the normal Cisco AnyConnect client from your Cisco VPN.

The client should connect and allow authentication using SMS, Mobile Phone Client, Token, and the Taskbar Utility. For PINpad and TURing the below modification is available for testing.


Cisco AnyConnect username password password.jpg


Swivel modified AnyConnect Client for TURing and PINpad

Download the client modifications

You can download the 4.7 client from here.

You can download the 4.4 client from here.

You can download the 3.1 client from here.

You can download the 2.4 client from here.

Prerequisites for the modified client

The client machine must be running a recent Microsoft Windows operating system. This client will not work on non-Windows systems. It has been tested on Windows 7 and XP, but we would expect it to work on any Windows system supported by Cisco.

The client machine must have the Microsoft.Net Framework version 3.5 or later installed. Windows 7 and later will probably have this installed by default.

Your Cisco VPN must support version 2.4, 3.1 or 4.4 of the AnyConnect client.

You must have Swivel 3.4 or later. For Pinpad support, you must either have Swivel 3.9.2 or later, or an appliance with the latest release of the Proxy application.

The client makes a direct call to request the TURing or Pinpad images, so you must have direct access to the Swivel server, or else have a proxy set up to redirect requests. The current version always adds "SCImage" to the URL for TURing images and "SCPinPad" to the Pinpad URL, so you cannot at present use our ASP, ASP.Net or PHP proxy solutions. This will be rectified before the product is released.

Installation of the Cisco AnyConnect client modifications

Locate the installation directory: by default this is C:\Program Files\Cisco\Cisco AnyConnect VPN Client. If you have a 64-bit operating system, the folder will probably be C:\Program Files (x86)....

Take a copy of the file vpnui.exe and rename it or store it in a safe place. You will need to restore this to use the default AnyConnect client again.

Copy the files vpnui.exe, Interop.vpnapi.dll and SwivelSettings.xml from the downloaded zip file into the AnyConnect folder. Alternatively, if you want to keep both clients alongside each other, you can rename the new vpnui.exe to something else.

Run the AnyConnect client. If you get an error at this point, check that you have the right Microsoft.Net Framework library installed.


Cisco Modified AnyConnect Configuration for PINpad and TURing

The first time you run the client, you will need to configure it. Click the arrow to the right of the Options button and select Preferences from the pop-up menu.

Fill in the correct settings in the dialog box. For a Swivel Appliance, the Swivel URL should be https://<Swivel Server>:8443/proxy/. For a software only install see Software Only Installation. If you are using a proxy, or a software-only installation, use the URL appropriate for your installation.

Note the option PINsafe is primary authentication. This should be checked if Swivel is the only form of authentication, or is the primary authentication. It should be unchecked if you are using PINsafe as secondary authentication. This option is only relevant for Pinpad, as it determines which password field is populated by the pad.

To add new Cisco VPNs, if yours is not shown, right-click on the box labelled Use PINsafe for the following connections, and select Add Server.... Note that you can specify that the Swivel security string is not shown for certain VPNs.

Now you have entered the preferences, you should be able to click Connect and see the login prompt. After you enter a username, or if you have checked the option to remember the last username, immediately, you should see either a TURing image, or a Pinpad. Use these to enter the Swivel one-time code.

Assuming you have entered the correct credentials, you will be connected to the Cisco VPN, and the client will minimize to the system tray. Click on the tray icon to restore the dialog.